HR2 Hose Cable Protection Ramp

Product Code: P-756336
HR2 Hose Cable Protection Ramp(Product Code: P-756336)

HR2 Cable Protection Ramp - Perfect With HGVs

The HR2 Cable Protection Ramp is great for protecting cables and hoses that cross roads and yards where there is a lot of traffic operating. Speed must be limited to 5mph in area and appropriate warning signage must be deployed.

  • 960(L) x 600(W)x 75(H) mm
  • 3 channels: 2 cables 68 x 50mm; 1 cable 55 x 50mm
  • 10 tonne weight limit per axle
  • Easily and quickly deployed
  • Three top loading channels for cables/hoses
  • Anti-slip hinged top panel
  • Interlocking design feature
  • Strong robust construction
  • Suitable for use with occasional HGV traffic

It is important to note that the HR2 cable ramp should not be left unnattended while in use. 

  • Easy Installation

    Easy Installation

  • High Visibility

    High Visibility

  • Rated at 5mp/h

    Rated at 5mp/h

Product Information

The HR2 Cable Protection Ramp lets you drive over cables, hoses and pipes without causing them damage. The tough rubber has been tested with HGV’s, allowing you to work without having to move wires every time a vehicle needs to pass by. The opening flap on the top of the cable ramp gives you simple access to your cables and hoses, giving you an easy way to place and remove them. The Cable Protection Ramp is easily and quickly installed.

  • This ramp has a clearly visible yellow cover with checker plate anti-slip surface moulded in high-grade polypropylene.
  • It can be used for a permanent solution thanks to 4 fixings holes which allow you to bolt the cable ramp to the surface.
  • You can also use it as the temporary solution as it’s light enough to carry but will stay in place if a vehicle passes over it.

All sections of this cable / hose protection system feature an interlocking system for secure mating of extension sections. Suitable for heavy-goods traffic which are common in warehouse and factories. Male End Caps and Female End Caps are also available to complete your cable ramp. It’s also great for home use across driveways and entrances, allowing you to do DIY and renovation work and still have access to your parking spaces. Order your Cable Protection Ramps online with Pittman Traffic and Safety Equipment today.  

Applications:

Construction sites, distribution depots, emergency works, road works, etc.

Specifications:

       Centre Section

  • Size: 960mmL x 600mmB x 75mmH
  • Body Material: Hard rubber
  • Cover Material: Polypropylene
  • Body Colour: Black
  • Cover Colour: Yellow


       45 Degree Angle

  • Size: 500/200mmL x 600mmB x 75mmH
  • Body Material: Hard rubber
  • Cover Material: Polypropylene
  • Body Colour: Black
  • Cover Colour: Yellow


       End Section

  • Size: 283mmL x 600mmB x 75mmH
  • Channels: 2 x 68mm, 1 x 55mm
  • Material: Hard rubber
  • Colour: Black

We recommend that appropriate warning signs are used with this product. Recommended speed 5mph.

Options Price Quantity

Main Section 960mm (756336)

incl VAT £102.00 ex VAT £85.00

End Section - Male (756334)

incl VAT £19.44 ex VAT £16.20

End Section - Female (756333)

incl VAT £19.44 ex VAT £16.20

Angled Section - Right (756332)

incl VAT £45.96 ex VAT £38.30

Angled Section - Left (756331)

incl VAT £45.96 ex VAT £38.30
Rated 5/5 based on 1 customer reviews
HR2 Hose Cable Protection Ramp

The HR2 Cable Protection Ramp lets you drive over cables, hoses and pipes without causing them damage. The tough rubber has been tested with HGV’s, allowing you to work without having to move wires every time a vehicle needs to pass by. The opening flap on the top of the cable ramp gives you simple access to your cables and hoses, giving you an easy way to place and remove them. The Cable Protection Ramp is easily and quickly installed.

  • This ramp has a clearly visible yellow cover with checker plate anti-slip surface moulded in high-grade polypropylene.
  • It can be used for a permanent solution thanks to 4 fixings holes which allow you to bolt the cable ramp to the surface.
  • You can also use it as the temporary solution as it’s light enough to carry but will stay in place if a vehicle passes over it.

All sections of this cable / hose protection system feature an interlocking system for secure mating of extension sections. Suitable for heavy-goods traffic which are common in warehouse and factories. Male End Caps and Female End Caps are also available to complete your cable ramp. It’s also great for home use across driveways and entrances, allowing you to do DIY and renovation work and still have access to your parking spaces. Order your Cable Protection Ramps online with Pittman Traffic and Safety Equipment today.  

Applications:

Construction sites, distribution depots, emergency works, road works, etc.

Specifications:

       Centre Section

  • Size: 960mmL x 600mmB x 75mmH
  • Body Material: Hard rubber
  • Cover Material: Polypropylene
  • Body Colour: Black
  • Cover Colour: Yellow


       45 Degree Angle

  • Size: 500/200mmL x 600mmB x 75mmH
  • Body Material: Hard rubber
  • Cover Material: Polypropylene
  • Body Colour: Black
  • Cover Colour: Yellow


       End Section

  • Size: 283mmL x 600mmB x 75mmH
  • Channels: 2 x 68mm, 1 x 55mm
  • Material: Hard rubber
  • Colour: Black

We recommend that appropriate warning signs are used with this product. Recommended speed 5mph.

HR2 Hose Cable Protection Ramp
Main Section 960mm £ 102
End Section - Male £ 19.44
End Section - Female £ 19.44
Angled Section - Right £ 45.96
Angled Section - Left £ 45.96
£ 19.44 to 102

You may also be interested in the following product(s)

<--LinkedIn Script-->