The Outdoor Step Anti Slip Kit allows you to stick the adhesive backing of or Anti Slip Tape to wood, concrete and stone surfaces without worrying about it peeling off easily. It’s great for moving dirt and other impurities that will reduce the effect of the adhesive. This means you will get the maximum usage from the anti slip tape.
By using the Surface Primer allows you to cover over and holes in the surface where you will be putting the anti slip tape, meaning 100% of the adhesive backing will be used. Many of the holes the surface primer covers are not visible to the naked eye, so the Surface Primer will ensure the complete surface is in use.
The Edge Fixing covers all the sides of the Anti Slip Tape seal the tape to the ground, giving you extra strength on the weakest area of the tape. The tight nozzle lets you easily apply the sealant easily and quickly, maximising the resistance against wear and tear.
The IPA Cleaner lets you clean the entire space where you will be putting the tape without the greasy residue most cleaners leave. Only a small dab of the cleaner will leave the surface perfect for bonding, allowing you to easily stick the anti slip tape to the ground.
With each Outdoor Step Anti Slip Kit you get 2 free rolls of Anti Slip Tape. You can choose from Black & Yellow or a Pure Black roll, all you to disguise the tape or make it as visible as possible depending on your environment. The gritted surface is ideal for slippy areas, ensuring you have sure footing at all times.
- Surface Primer: 1 Litre (enough for 5m²)
- Edge Fix: 140ml tube (enough for 35 linear metres)
- PA Cleaner: 1 litre (very little amount required)
- Anti Slip Tape: 36.6 Metres